Mercury BRAVO 3 XR PROPELLER 16 x 22 REAR - 48-8M0073459

Mercury BRAVO 3 XR PROPELLER 16 × 22 REAR ONLY

Part no: 48-8M0073459

FRONT & REAR PROPELLERS SOLD SEPARATELY, IMAGE IS REPRESENTATIVE IMAGE ONLY!

Designed for 250-525 HP gas and diesel powered sport cruisers and performance Bravo Three applications. A large diameter 4-blade forward propeller followed by a smaller diameter 3-blade aft propeller feature built in cup for incredible handling, improved fuel economy at cruise, and boat control. Intended for the Bravo Three XR drive and can be used with the Bravo Three and Bravo Three X drives. The even pitch is made from the odd pitch casting; Mercury Racing adds additional cup for increased holding. The Pro Finish provides a performance leading edge, consistent cup heights, zero balanced for minimal vibration and durable high luster finish.

Four-Blade, Front, High Gloss Finish
Hardware sold separately (not included with propeller)
As a general rule the odd pitch numbered Bravo Three XR propellers run similar engine RPM to the next higher pitch even numbered Bravo Three Propellers.
For example the Bravo Three XR 27" pitch matches the RPM of a Bravo Three 28" pitch

MERCURY MERCRUISER: BRAVO THREE
All Bravo Three drives
4-Blade front, 3-Blade rear propellers
If boat is propped correctly with original Bravo Three propellers then drop down 1" pitch to maintain engine RPM with Bravo Three Diesel propellers

Bravo Three Propeller Hardware for reference (not included with propellers):
Forward Thrust Washer Part no: 805101T
Aft Thrust Washer Part no: 805100
Forward Prop Nut Part no: 859131
Aft Prop Nut Part no: 862907
Bravo Three Inner Prop Nut Wrench Part no: 805457T1

Please contact us with your model and serial number if unsure