Mercury - BRAVO 1 FS 15.25X28 RH - Quicksilver - 48-8M0064473

Quicksilver - B1FS 15.25X28 RH

The Mercury Bravo 1 is a 4-blade stainless steel propeller for high-performance, high drive height, outboard and sterndrive applications. With the introduction of the four-blade Bravo FS, bass, multispecies, bay boat, and center-console applications have realized much quicker planing compared to three-blade propellers. In addition, the Bravo FS provides a much smoother ride by improving the angle of attack. By switching to a Bravo FS, the engine can be raised as much as an inch, getting the most performance of any engine application and improving the driving experience. For some stepped hulls, the Bravo FS offers more bow lift than the Rev 4, improving ride quality because the boat rides on the steps correctly.

Hub kit sold separately, see the fitment section below to find the correct hub kit for your application.
Compared to a three-blade propeller, the shortened barrel of the four-blade Bravo FS provides the same impressive bow lift, with a slight degree of added stern lift.
In light to medium chop, the Bravo I FS offers a smoother ride.
In rough conditions, four blades improve the angle of attack with the motor trimmed in. This means the boat can stay on plane at lower speeds.
Greatly improved hole-shot and midrange fuel economy
According to the Mercury propeller guide handbook if running a 3-blade propeller move up 1" of pitch to maintain similar RPMs.
OR if replacing the Fury, Revolution 4 or a standard Bravo I propeller move up 2" of pitch to maintain similar RPMS.